New Aftermarket 705-56-24080 Gear Pump for Excavator PC60-3
| Shaft Length: | 45.0 LB |
| Port Type: | Flange Mount |
| Mounting Flange: | Left Hand (CCW) |
| Pressure Port Size, Shaft End: | 2520VQ17A11-11AA20-LH |
| Pump Series: | 2 1/2 |
| Integral Valve Configuration: | Flange |
| Weight: | N/A |
| Shaft End Flow @ RPM: | Standard Pilot |
| PDF |
|
Product Details
| Shaft Length | 45.0 LB |
| Port Type | Flange Mount |
| Mounting Flange | Left Hand (CCW) |
| Pressure Port Size, Shaft End | 2520VQ17A11-11AA20-LH |
| Pump Series | 2 1/2 |
| Integral Valve Configuration | Flange |
| Weight | N/A |
| Shaft End Flow @ RPM | Standard Pilot |
| Shaft End Pressure [Max | 0.875 in |
| Shaft Seal Type | 13 Tooth Splined |
| Manufacturer Part No. | 2520VQ |
| Major Diameter [Max | 1 3/8 in |
| Port Size | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Major Diameter [Min | 0.715 in |
| Minor Diameter [Min | SAE B, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Seal Material | 16/32 |
| Minor Diameter | 2700 |
| Spline Description | 2500 |
| Rotation | N/A |
| Shaft Key | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 0.873 in |
| Displacement Shaft End (cu in/revolution) | 0.872 in |
| Pilot Type | N/A |
| Model No. | N/A |
| Shaft Dia. | N/A |
| Cover End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 2520VQ17A11-11AA20-LH |
| Minor Diameter [Max | 3000 |
| Shaft Type | 3000 |
| Relief Valve Setting | 16.5 |
| Cover End Pressure [Max | 25.5 |
| Shaft End RPM [Max | w/o Integral Valves |
| Cover End RPM [Max | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| GPM @ 1,800 rpm, Cover End | 1 in Flange |
| Mounting | 2.22 |
| Displacement Cover End (cu in/revolution) | 3.37 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692