G102 Hydraulic Pump Parker Commercial Replacement For Dump Truck
| Mounting: | 75.0 LB |
| Port Type: | Flange Mount |
| Shaft End RPM [Max: | Left Hand (CCW) |
| Shaft End Pressure [Max: | 3520VQ30E11-11CC20-LH |
| Shaft Dia.: | 3 |
| Model No.: | Flange |
| Cover End RPM [Max: | N/A |
| Shaft Type: | Standard Pilot |
| PDF |
|
Product Details
| Mounting | 75.0 LB |
| Port Type | Flange Mount |
| Shaft End RPM [Max | Left Hand (CCW) |
| Shaft End Pressure [Max | 3520VQ30E11-11CC20-LH |
| Shaft Dia. | 3 |
| Model No. | Flange |
| Cover End RPM [Max | N/A |
| Shaft Type | Standard Pilot |
| Shaft Length | 1.25 in |
| Minor Diameter [Min | 14 Tooth Splined |
| Pilot Type | 3520VQ |
| Pressure Port Size, Shaft End | 1 15/16 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Minor Diameter [Max | 2500 |
| Spline Description | 1.04 in |
| Shaft Key | SAE C, 2 Bolt |
| Weight | Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) | 12/24 |
| Port Size | 2500 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Max. RPM [Max | N/A |
| Seal Material | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 1.248 in |
| Major Diameter [Min | 1.247 in |
| Cover End Flow @ RPM | N/A |
| Port Orientation - Shaft End | N/A |
| Relief Valve Setting | N/A |
| Controlled Flow Rate | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Major Diameter [Max | 3520VQ30E11-11CC20-LH |
| Manufacturer Part No. | 3000 |
| Cover End Pressure [Max | 3000 |
| Shaft Seal Type | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 45 |
| Integral Valve Configuration | w/o Integral Valves |
| Minor Diameter | Outlet 45° CW from Inlet |
| Mounting Flange | Outlet Inline w/Inlet |
| Pump Series | 1 1/16 in SAE O-Ring |
| Rotation | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 2.22 |
| Pressure Port Size, Cover End | 5.96 |
BMPH200 Orbit Hydraulic Motor 101-1692-009/101-1692